Horizon-fitness CT61 Bedienungsanleitung PDF herunterladen (Seite 5)

DO NOT CUT STRAPS UNTIL STEP 1-E!* Disassemble box and remove the

cardboard packaging that is not beneath the treadmill. Do not attempt to lift the

treadmill at this time. Remove plastic wrap from console masts.

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your treadmill, to

prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and

partially threaded in before completely tightening any ONE bolt.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

TREADMILL

OPERATION

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

LIMITED

WARRANTY

ASSEMBLY STEP 2

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

TREADMILL

OPERATION

LIMITED

WARRANTY

TROUBLESHOOTING

& MAINTENANCE

CONDITIONING

GUIDELINES

* Be sure to tighten bolts after all are lined up.

BOLT (B)

LOCK

WASHER (C)

ARC WASHER (D)

CONSOLE CABLE

DO NOT ATTACH

THIS SIDE UNTIL STEP 2-F

ASSEMBLED IN STEP 2-D

















HARDWARE BAG FOR STEP 2 CONTENTS :

PR E- AS SE MB LY

WARNING

ASSEMBLY STEP 1







HARDWARE BAG FOR STEP 1 CONTENTS :

LEFT CONSOLE MAST

LEFT SIDE LINKAGE ARM

BOLT A

* NOTE: If the straps have been removed before completing step 1-D and the linkage arms can not be aligned,

refer to the

TROUBLESHOOTING section (page 26) in order to restore the treadmill to its proper position.

A Open HARDWARE BAG FOR STEP 1.

B Lift LEFT CONSOLE MAST into

upright position. Be sure to hold

the console mast firmly, as it will

not stay in the upright

position on it’s own.

C Move LEFT SIDE LINKAGE ARM

into position. Insert BOLT (A) and

tighten.

D Repeat on the right side.

E Now cut the banding straps and

remove remaining packaging

material.*

F Lift the RUNNING DECK until lock

latch on side of treadmill is fully

engaged.

G Remove CONSOLE from box

and place out of the way.

H Lower the treadmill RUNNING

DECK from the folded position by

stepping on LOCK LATCH on lower

right side.

Open HARDWARE BAG FOR

STEP 2.

B With running deck in lowered

position, place

CONSOLE

on upright masts. Slide the

brackets that are underneath

the console into the top holes of

the upright masts.

C Place LOCK WASHER (C) and

BOLT (B) into flat side of

LEFT upright MAST and lightly

tighten.

D Place ARC WASHER (D) and

BOLT (B) into curved side of

LEFT upright MAST and lightly

tighten.

E Gently lift RIGHT side of

the console to connect the

CONSOLE CABLE. Carefully tuck

wires in mast to avoid damage.

NOTE: Do not pinch console

cable or grip pulse wires.

F Repeat steps C-D above to

assemble the right side upright

mast and console.

G Tighten all bolts completely.

CT61 Treadmill Rev 1.3.indd 8-9 5/31/05 1:55:14 PM

1 2 3 4 5 6 7 8 9 10 ... 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

Horizon-fitness CT61 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sport und Erholung Horizon-fitness CT61